You have two reports on participatory budgeting. One gives the number of “votes cast”, the other the number of “voters”, and your supervisor expects you to compare turnout. Start by checking who or what each report counted. Look for references to people, ballots and votes for projects in both documents, and write down the denominator behind each percentage. If you cannot establish the number of eligible voters on the same basis, you can calculate the number of people who cast a valid vote per 100 residents in each city. Label the measure accordingly. If you cannot establish the number of people in one city either, keep any total of votes for projects separate.
In a thesis in the “Public administration” programme, you can show how to reconcile the documents and use them to write the methods, results and discussion. The example takes you through two fictional reports. The larger city received more ballots, and its participation figure per 100 residents was lower. You will also see what you can write when the voting rules or reporting prevent that calculation. All numbers for City A and City B are invented. The real publications illustrate how to verify definitions and explain limitations.
Decide what question the comparison should answer
In participatory budgeting, residents vote on how to allocate part of a municipality's spending. Article 5a of Poland's Act on Municipal Self-Government defines participatory budgeting as a special form of public consultation. It provides for a municipal council resolution setting rules for voting, determining results and making them public. To compare two editions in a thesis, find the resolution that applied to each edition and the document reporting its results. The Act gives the study its administrative context. The documents for each edition explain what the reported categories mean and how the figures were compiled.
Start by choosing whether your question concerns participation by individuals, ballot validity or support for projects. You can cover all three in a thesis, provided each has a defined unit and sources. The main question here is “How many people cast a valid vote per 100 residents in the editions studied in the two cities?” A second question asks what share of verified ballots were classed as valid. For the first, you need the number of people and the population. The second concerns a step in processing ballots and requires counts of valid and verified ballots.
When can you use the word “turnout” in a heading?
Participatory budgeting documents use the word for measures with different denominators and sometimes for counts of ballots cast. Tell readers early in the thesis what you mean by turnout. If the source gives a credible count of eligible voters for the edition and the number of eligible people who voted, you can calculate participation among eligible voters. Specify whether the numerator counts everyone whose participation was successfully registered or only those who cast a valid vote. The denominator answers “Who could vote?” The numerator answers “Who counted as having voted?”
If all you have is a population count from the Statistics Poland Local Data Bank, you can calculate participation in relation to the resident population. You might head the subsection “Participation per 100 residents” and define both parts of the calculation in the opening paragraph. If a report calls a similar measure “turnout”, give the authors' definition when citing it. This keeps the meaning of the percentage clear as you move between sources. If you cannot establish how many people were eligible, record this as a finding of the document review and calculate only the measures the documents support.
How do you choose editions that can be compared?
Check the year and the actual dates of voting. The edition name may refer to the financial year in which projects are budgeted, even though voting took place earlier. For each report, record the edition name, voting dates, the area covered and the date you consulted the documents. If the titles name the same year, verify the dates in the announcement or schedule. If the editions have different names, you can compare them if voting occurred in the same period relevant to the study and you explain the choice.
Decide whether you are comparing whole cities, neighbourhoods or groups of projects. A vote may allow one choice for a city-wide project and another for a local one. A vote for a local project then forms part of the data on projects. Counting participants across the city requires knowing whether the same person could appear in both groups and whether the report accounts for that overlap. If your study covers only neighbourhoods, establish whether the numerator refers to where the voter lives, where the project is located or the project category in which the vote was cast. The three criteria can assign records differently. The main example uses city-wide voting and all people who cast a valid vote in the edition.
What should you record for each source?
For a municipal resolution, record its number, date and the passage that governs voting. If rules were specified in an annex or an amendment, note the version that applied to the edition. For a report, record the title, publisher, date and page or annex. For Statistics Poland data, record the selected variable, territorial unit, year and reference date for the population count. If a document has been updated, keep a reference to the version used in your calculation. Leave a record that connects each percentage to the two figures behind it and each figure to its source.
The page announcing the results may leave categories unexplained. A summary may count only votes for projects. An announcement after voting may explain why ballots were rejected, while an annex contains the number of people. Record cases where you cannot connect two fields. A note such as “the available documents do not define a valid vote” is a basis for deciding whether the figures can support a common measure. It also gives you something specific to verify if the authority later supplies a clarification.
Identify whether the source counts people, ballots or project choices
When you see the heading “votes cast”, ask three questions. Is each person counted once? Could a ballot contain more than one choice? Does the total include rejected submissions? The answers depend on the report and its definitions. The column heading can help you locate the method, but you will usually need more information before treating the figure as a count of participants.
What if a person could choose two or three projects?
Voters can choose projects up to the limit set for the edition. Suppose they could support two projects, and some supported only one. The number of project choices can then exceed the number of people. Dividing by the maximum number of choices will recover the number of participants only if every person used the same maximum, all choices came from people who belong in your numerator and the total includes all of their choices. If some selected one project and others selected two, different numbers of people can produce the same total.
For example, 100 choices can come from 100 people who each selected one project or 50 people who each selected two. They can also come from 40 people who selected one and 30 who selected two. All three cases produce 100 choices from 100, 50 and 70 people respectively. The total still helps describe support for individual projects. To analyse participation, use a source that counts each person once.
Also check whether a person could vote on projects in two categories. If the report gives 6,000 people who voted for city-wide projects and 5,000 who voted for local projects, adding them to reach 11,000 requires knowing that the groups do not overlap. If 2,000 people are in both, the total is 6,000 + 5,000 – 2,000 = 9,000. Subtracting the overlap prevents double counting. If the overlap is unknown, give the counts separately and explain that the documents do not establish the total number of participants.
Does a submitted ballot correspond to one person with a valid vote?
Check how many times one person could appear among the submissions. The records can include submitted forms, verified forms, valid ballots and people with at least one choice counted in the result. If the document reports online and paper voting separately, check whether the way records were combined removes duplicates across the two channels. You can add the counts and call the total unique people if the source confirms the channels are mutually exclusive after verification. If the figures refer to submitted forms before verification, call the total the number of forms. Establish which stage each count comes from.
Also check the rules on validity. One edition may assess an entire ballot. Another may assess each choice separately. In the second case, a person whose ballot has one valid choice and one rejected choice may count as a participant, while the rejected choice appears in a separate statistic. Adding valid choices to invalid ballots would combine two different units. For the exercise, assume a simpler rule. After verification, each person has at most one ballot, and a valid ballot contains at least one choice counted in the results. Check whether these conditions hold before applying the calculation to your material.
How do you record a discrepancy between an announcement and an annex?
If the announcement says “more than 12,000 votes” and a detailed annex gives 12,600 ballots and 19,500 project choices, locate the figures in both sources. The rounded figure may refer to the same category as one of the precise counts, or it may describe another stage. In your notes, record the wording used in the document, the unit you identified and the passage that confirms it. Use a figure whose unit you can verify. If you choose a later correction, record its date and check that both cities' data come from a comparable stage of verification.
Keep a record of how you resolved the discrepancy. If two sources give different numbers for the same category and edition, check their publication dates, the caption of the annex, the status of any correction and the wording of the definition. If you still cannot confirm the reason, report the discrepancy or omit the uncertain measure. Readers can then see why the final chapter does not use that figure.
Choose a denominator and identify the population source
You need a population count if you want to compare participation in two cities of different sizes and do not have a common measure of eligibility. If you use data from Statistics Poland, select comparable territorial units. Record the full unit name and check whether it covers the city, an entire urban-rural municipality or a wider area. Using the whole municipality with a numerator restricted to the city would extend the denominator beyond the area covered by the numerator. Check that the boundaries and definitions of both units match the editions you are analysing.
Which population date should you use for an autumn vote?
Choose one rule in advance for both cities. You could use the resident population at the end of the voting year if it is available for both units and suits the study. Another option is the nearest shared reference date before voting. Record the date and reason for using it in your methods. The year-end population is a reference figure. Voting took place during particular weeks. Explain which population date you used, and if the boundaries changed significantly between voting and that date, compare the areas before combining the figures.
If the reports use different reference dates, keep the reported figures and your harmonised calculation in your notes. For each reported figure, record who calculated it and how. For your calculation, record the common date and source. If data are unavailable for one city on that basis, look for the nearest common alternative or explain why the cities must be described separately. Use a definition the evidence can support for both cities.
Can a local election register stand in for participatory budgeting eligibility?
Using local election figures is a separate methodological choice. Kamil Glinka compared participatory budgeting votes held in 16 Polish cities in 2018 and used the number of people eligible to vote in local elections that year as the denominator. He also described the difficulty of establishing the number eligible to take part in participatory budgeting. The measure can therefore be named precisely as the number of people who voted in participatory budgeting in relation to the number eligible to vote in local elections, under the author's method. If the two populations differ, treat this as a proxy for comparison and explain the difference.
The Institute of Urban and Regional Development took a different approach in its evaluation of Wrocław's participatory budgeting scheme. In Table 8, the authors used the city's total resident population from Statistics Poland as the denominator. For 2023, they reported 83,754 voters, 673,740 residents and 12.43% under their definition. This example shows where to look for the denominator behind a published percentage. In the next table, the authors separately report valid and invalid votes. If your numerator includes only people who cast a valid vote, verify that information in the source and record your definition. Give percentages their own labels whenever their definitions differ.
What can a population figure tell you about eligibility?
Population statistics follow their own methods. The number of people eligible to take part in a particular vote depends on the applicable rules and on how that population is established. Aggregate data may be insufficient to derive one number from the other. Avoid estimating eligibility by subtracting an arbitrarily selected group of residents. A count of people who entered their details in the voting system also cannot represent the entire eligible population unless it covers everyone who could participate.
If both authorities give eligibility counts for the relevant edition and explain the common basis, calculate participation among eligible voters as well. Compare what that measure and the figure per 100 residents can tell you. If only one city's eligibility count is available, you can report an additional measure for that city under its own label. The inter-city comparison still needs a common definition. If you have no eligibility figures, record that gap in the methods and explain how it limits interpretation of the difference.
Calculate participation in two fictional cities
The exercise uses two city-wide votes held in autumn 2025. You will compare reports issued after verification. Both authorities allowed up to two project choices on a valid ballot. The reports give verified counts of unique people after checking for repeat submissions, but do not give numbers of eligible voters calculated on the same basis. Use the number of people who cast a valid vote per 100 residents. For the denominator, take the population within each city's boundaries at the end of 2025.
The first report's main announcement gives 15,900 ballots. The second report gives 15,120 votes for projects. Each count appears in a description of participation, but the two figures cannot be compared as numbers of people. First trace the steps from submitted records to the count of unique voters in each city. The annexes contain enough information to calculate the same measure for both.
How do you read City A's report?
- 15,900 forms were submitted online or at voting locations. These included attempts by people already recorded to submit another ballot. The report shows that 540 duplicates were excluded before ballot review. After checking for duplicates, 15,360 forms remained, one per person.
- 14,400 ballots were found to be valid. The remaining 960 verified ballots were invalid. In this example, the resolution and reporting method establish that each valid ballot corresponds to one person with at least one valid project choice.
- The valid ballots contained 21,600 project choices. You can use the total for questions about projects or the number of choices per ballot. Use 14,400 for the calculation about people.
- The resident population was 120,000. The data cover the whole city at the end of the voting year. Check the other city's population on the same basis.
If you need to check the source against your notes, make two calculations. 15,900 – 540 = 15,360 shows the transition from submissions to the ballots left after removing duplicates. 14,400 + 960 = 15,360 checks the breakdown of the verified ballots. Both checks make sense because the fictional report confirms what each stage covers. In a real report, the difference between submitted and verified forms may include other situations. Check the method before attributing the difference to any particular cause.
How do you read City B's report?
- 11,010 form submissions were recorded. After excluding 210 duplicate records, 10,800 ballots were checked. As in City A, there was at most one ballot per person at that stage.
- 10,080 ballots were valid and 720 were invalid. In this example, 10,080 people had their votes counted. Validity was determined after verification in both channels.
- 15,120 is the number of project choices on valid ballots. The figure appears in the main report, and the annex explains what it counts. You can compare it with the 21,600 project choices in City A if your question concerns votes for projects and both reports counted choices according to comparable rules.
- The resident population was 72,000. The reference date is the same as in City A, and the area covered matches the numerator in the same way.
Checking 11,010 – 210 = 10,800 and 10,080 + 720 = 10,800 confirms that the fictional figures are consistent. In your notes, record that you used one population reference date for both units. The population count uses its own reference date, which may differ from the date voting closed or fall in a different year from the one in the edition's title. This helps someone else find the two figures needed for the calculation even if City B's report is organised differently from City A's.
What is the participation figure under a common definition?
Divide the number of unique people with a valid vote by the resident population and multiply by 100. In City A, 14,400 / 120,000 × 100 gives 12.0%. In City B, 10,080 / 72,000 × 100 gives 14.0%. City A had 4,320 more people with a valid vote. City B had the higher figure per 100 residents, by 2 percentage points. To report both values in one results sentence, give the numbers and state the denominator. “The number of people with a valid vote amounted to 12.0% of the resident population in City A and 14.0% in City B.”
The example shows why two separate sentences can help. “More people voted in City A” gives an absolute count. “City B had more people with a valid vote per 100 residents” describes the participation measure. Once the units are stated, readers can see how both statements can hold. A chart titled “People with a valid vote per 100 residents” identifies the comparison, and its caption can give the numerator and denominator for each city.
What changes if you calculate the share of verified ballots that were valid?
In City A, 14,400 / 15,360 × 100 gives 93.75% of verified ballots. In City B, 10,080 / 10,800 × 100 gives about 93.33%. The denominator is a count of ballots, while the numerator happens to equal the number of people with a valid vote. The percentages show the share of ballots found valid after checking for duplicates. In your chapter, report this calculation after the main result and explain why the figures are much higher than 12.0% and 14.0%.
If your question concerns all attempts to submit a form, use a different denominator and identify the stage. Dividing 14,400 by 15,900 would relate the number of valid ballots accepted to all forms submitted in City A. The denominator would include the duplicates excluded earlier. That calculation can describe the processing of forms if it matches the question. Choose the measure that reflects the stage you are studying and clearly identify the records it includes.
How do you account for paper and online voting?
After checking for duplicates, City A's fictional annex gives 13,800 online ballots, of which 13,000 were valid, and 1,560 paper ballots, of which 1,400 were valid. City B gives 8,100 online ballots, of which 7,680 were valid, and 2,700 paper ballots, of which 2,400 were valid. After verification, each ballot was assigned to one final submission channel. You can therefore add the valid counts for both channels to recover 14,400 in City A and 10,080 in City B. Note that the channels are mutually exclusive at this particular stage. The figures record ballots accepted for review, rather than website visits or attempts to vote.
In City A, online ballots accounted for about 90.28% of valid ballots, from 13,000 / 14,400 × 100. In City B the figure was about 76.19%, from 7,680 / 10,080 × 100. You can report that a higher share of valid ballots was submitted online in City A. State the denominator. To assess whether the online option increased participation, you would need to know what participation would have looked like under comparable conditions without that option. These counts show how voters used the available channels under the arrangements in each city, including the availability of other ways to vote.
Adjust the scope of the comparison when data are missing
Public documents do not always give you enough to reconstruct every measure. When a figure is missing, identify which question this affects. Missing eligibility counts prevent a calculation based on eligibility. The exercise still provides enough data to calculate the figure per 100 residents. A missing count of unique people in the numerator has larger consequences for a comparison of individual participation. Record which field you looked for, where you looked and what you did after finding it was missing. This helps readers judge whether the chapter reflects the available evidence.
What if only one city reports how many people were eligible?
Suppose City A also reports that 90,000 people were eligible under the rules of the same edition and confirms that the 14,400 people with a valid vote belong to that population. Then 14,400 / 90,000 × 100 gives 16.0% of eligible voters casting a valid vote in City A. If you still have no comparable source for City B, keep that figure separate from the earlier 14.0%, which uses City B's resident population. You can report the additional result for City A alongside its 12.0% per 100 residents. The comparison between cities still uses 12.0% and 14.0%. Give both denominators so readers can tell when the definition changed.
If you later find that City B had 63,000 eligible voters on the same basis, the hypothetical calculation 10,080 / 63,000 × 100 also gives 16.0%. In this version, participation among eligible voters is the same in both cities even though the figures per 100 residents differ. Each calculation uses a different population definition. If both sets of figures come from verified sources, you can use this example to show how the choice of denominator affects the findings. State the purpose of each measure and say which answers your research question.
What if the report gives only the number of votes for projects?
Suppose all you know for City B is the total of 15,120 project choices and the population of 72,000. The result of division and multiplication by 100 has the unit “valid project choices per 100 residents”. This leaves the number of participants unresolved. If the rules allowed up to two valid choices and the total includes all choices from the ballots counted for participation, you can calculate bounds. There would be 7,560 people if each made two choices, and 15,120 if each made one. This requires confirmation that all choices are included and each person made at least one. The range shows why the exact count remains unknown. Its midpoint provides no estimate of the number of voters.
If the source gives only votes for selected projects, even those bounds may fail to describe participation in the vote as a whole. Limit the comparison to categories both reports confirm, such as voting rules or the way results were reported. You can first ask the authority for an aggregate count of people with a valid vote, the date of the figures and an explanation of how the count was calculated. A verified aggregate figure is sufficient for the chapter. If it is unavailable, explain what data you obtained and which part of the question remains open.
What if the voting rules changed during the comparison period?
Establish whether the change affects people, forms, projects or reporting. A change in the number of choices allowed can strongly affect the meaning of project-vote totals. Comparisons of participation may still be possible if each city can give the number of unique participants under a comparable rule. Changes in the definition of validity directly affect who is counted in “people with a valid vote”. Even with a common denominator, explain how each edition constructed its numerator. If the definitions differ too much, report the results separately and explain what can be drawn from each.
In a thesis covering several editions, rules may have changed between years within one city. Make a timeline with the edition, resolution version, definition, voting date, ballot verification process and final data source. Describe the results before explaining possible causes. You could hypothesise that a new voting confirmation procedure changed the number of valid ballots. Testing that hypothesis requires more information than two percentages from different years. If your chapter discusses rules, municipal records and how they shape a procedure, see the guide to analysing municipal documents in a public administration thesis.
Write the methods, results and discussion on the same basis
One comparable measure takes up little space when the source and method are clear. Readers should be able to trace which decisions came before the calculation and where to check the figures. In the methods, give the scope, editions, reason for choosing the cities, types of documents, common definitions of numerator and denominator, and treatment of duplicates. Present the observations and calculations in the results. In the discussion, explain how differences in procedures and the lack of eligibility data affect interpretation. The next three passages draw on the same fictional reports.
Model methods paragraph
We compared votes held in autumn 2025 in two cities. From the reports issued after ballot verification, we recorded the number of unique people whose valid ballots contained at least one choice counted in the result. At that stage, both cities assigned at most one ballot to each person, and each ballot belonged to one voting channel. The denominator was the population within each city's boundaries at the end of 2025. We expressed participation as the number of people with a valid vote per 100 residents. Participation among eligible voters was unavailable because the sources did not report eligibility counts on a common basis.
In a real study, add citations to the relevant statements. Identify the records that show how duplicate submissions were checked and excluded, and give the source for the population. If you processed the records yourself, explain the rule you applied. If a city already provided a count of unique voters, say that you took that figure and its definition from the document. Identify your own calculations in the results or a note, as required by your institution. This lets readers tell which numbers came from the documents and which came from your analysis.
Model results paragraph
City A recorded 14,400 people with a valid vote and had 120,000 residents. City B recorded 10,080 people with a valid vote and had 72,000 residents. That was 12 people with a valid vote per 100 residents in City A and 14 in City B. City B's figure was higher by 2 percentage points, although City A recorded more people with a valid vote overall. Among verified ballots, the share of valid ballots was 93.75% and approximately 93.33%, respectively. That additional measure describes ballot validity after duplicate records were checked.
Before writing, decide whether to express the values as percentages or numbers per hundred residents. They are numerically identical on a scale of 100, so use the chosen wording consistently. Express the difference between two percentages in percentage points. For absolute counts, give the difference in people. If you plan to use a chart, give it a title and caption that identify the definition without requiring readers to search the methods section. You can give a simple formula with the full figures once and refer to the named measure later.
Model discussion paragraph
The difference of two percentage points concerns the number of people with a valid vote in relation to the resident population. Participation among eligible voters under the rules of each vote remains unknown. The cities used their own procedures and differed in size. The two editions show how a larger absolute number of voters can coexist with a lower figure per 100 residents. Assessing the effect of a particular voting arrangement on participation would require data that allow its role to be distinguished from other characteristics of the cities and editions.
You can return here to the measures other researchers used. The IRMiR evaluation related the number of people who voted to the resident population. Glinka used the number of people eligible to vote in local elections. These examples show why the word “turnout” alone gives too little information to compare figures from different sources. To discuss a longer voting period, more voting locations or an information campaign, first check what the documents show for both cities. You may be able to report features that accompanied the observed difference. Assessing whether they caused it requires a design that helps isolate their role.
How do you conclude the chapter without going beyond the results?
Answer the question you set out to examine. In the exercise, that means describing participation on a common basis. “In the editions studied, City B had more people with a valid vote per 100 residents. City A recorded more people with a valid vote overall.” If the study covers only two cases, include the dates and areas covered when using the conclusion in the abstract. Comparing how well each city encourages participation would require defined criteria and broader evidence. If you want to study a particular procedure, frame it as its own question and specify the data needed.
Review any conclusions about inclusion and the quality of the process. Counts of votes describe observed participation under a stated definition. To discuss participants' experiences, you may need a survey, interviews or a documented analysis of difficulties people reported. The proportion of valid ballots gives no measure of satisfaction. You can identify a specific gap in your sources, such as the absence of data on reasons for rejecting ballots in each channel. This conclusion follows from the material you examined and shows how to extend the study while keeping the original findings in context.
Check the figures and wording before submitting the chapter
Choose one percentage in the chapter and trace each step. Find the numerator and denominator in your sources. Compare the labels in your spreadsheet and your chapter. Recalculate from the original counts and check the direction of the difference. For City A, 14,400 over 120,000 gives 12.0%. For City B, 10,080 over 72,000 gives 14.0%. If someone finds 15,120 instead of 10,080 for City B, they need to see that it counts project choices.
When revising the chapter, also check the title and abstract. You may have corrected the denominator in the methods while “percentage of eligible voters” remains in the abstract. An earlier chart label can carry the same error. For each correction, record whether it concerns a figure, the unit or the scope of the conclusion. Check whether the change requires updating a secondary question or recalculating figures for paper and online ballots in the appendix.
- Scope: Do the sources cover whole cities, the same type of voting and the dates you identified?
- Numerator: Does it count unique people who cast a valid vote, and do the documents confirm how repeat submissions were handled?
- Denominator: Have you given the population source or definition of eligibility and applied the same basis in both cities?
- Processing stages: Do submitted forms, valid ballots, invalid ballots and project choices each have a clear label?
- Consistency: Do the figure in the text, chart title and abstract use the same unit? Are differences between percentages given in percentage points?
- Scope of the findings: Do your conclusions reflect the sources and calculations? Did you explain missing information where it affects the research question?
If your thesis guidelines require it, attach a spreadsheet with the figures and their sources. In a presentation, two correctly labelled values and a short caption explaining the denominator will usually suffice. You can use the discussion to explain the difference between the absolute number of voters and participation in relation to the resident population. If someone asks why you did not compare the official percentages, explain what each report counted and how you constructed a common measure. This gives an answer grounded in your material and a calculation someone else can repeat.
Questions about documents, results and the research chapter
Can a public administration thesis be based on documents from the BIP without a survey?
Yes, if the document analysis fits the topic and the supervisor's or university's guidelines. The thesis objective, selection criteria, period, and method of analysis are important. Send the topic, plan, and any available resolutions, regulations, activity reports, or other reports. I will help organise the research design and clarify the role of each source.
How does thesis scope differ from study limitations?
Scope defines the deliberately chosen problem, evidence, population and period. Limitations explain how design features or difficulties restrict interpretation. An omitted topic is not automatically a flaw; the important question is whether the conclusions stay within the stated scope.
How can I connect a limitation to its effect on the conclusions?
Identify a specific feature of the procedure, the finding or claim it affects, and the consequence. Then explain what you actually did to address it and what remains uncertain. A generic list mentioning sample size and time pressure is not enough.
How does preparing the research chapter differ from statistical analysis?
The research chapter combines a description of the actual study, presentation of results, interpretation and answers to the thesis research questions. Statistical analysis concerns the choice of methods and calculations on quantitative data. You can request both types of support together, but I agree any new tests and verification of calculations separately after reviewing the material.
Can an already prepared research chapter be improved?
Yes. I can check the consistency of tables, charts, calculations, comments, and conclusions, and adjust the layout to the supervisor's comments. To verify the accuracy of the results, I will also need the source data and the research instrument.
What should I send for a quote?
Provide your topic, subject area, type of thesis, stage of preparation and required deadline. Describe what needs to be prepared, checked or revised. Attach the current document, university guidelines and any comments from your supervisor.
For research support, include your research outline, survey or interview guide and the data you have collected. For editing that addresses text similarity, attach your JSA report if you have one. You don't need every document before asking about the scope of support.
Sources
- Ustawa z dnia 8 marca 1990 r. o samorządzie gminnym, art. 5a. Tekst jednolity, Dz.U. 2026 poz. 662.
https://eli.gov.pl/eli/DU/2026/662/ogl - Główny Urząd Statystyczny. Bank Danych Lokalnych. Population data and user guide on territorial units.
https://bdl.stat.gov.pl/BDL/andhttps://bdl.stat.gov.pl/bdl/pdf_files/Podrecznik_uzytkownika_BDL.pdf - Instytut Rozwoju Miast i Regionów (2024). Ewaluacja Wrocławskiego Budżetu Obywatelskiego. Raport końcowy. Wrocław. Section 4.5, Tables 8 and 9.
https://www.wroclaw.pl/beta2/files/dokumenty/902708/Ewaluacja%20WBO_raport%20ko%C5%84cowy_final.pdf - Urząd Miejski Wrocławia. Wyniki głosowania Wrocławskiego Budżetu Obywatelskiego 2023.
https://www.wroclaw.pl/wbo/wyniki-glosowania-wbo-2023 - Glinka, K. (2019). If not the way of voting organization, then what? In search of the conditions for the turnout in the participatory budget voting – the case of the sixteen largest Polish cities. Polityka i Społeczeństwo, 17(4), 100-121. DOI
10.15584/polispol.2019.4.7.
Do you need to compare participatory budgeting votes for your thesis?
Share your topic, your supervisor's requirements, the two reports and the draft section. Include the population sources and say whether your data cover people, ballots, project choices or eligibility. Indicate whether you need help with the methods, reconstructing the calculations or connecting the results to the discussion.
Contact StudentSupport


